HPI6002(0.4-15) KW
All plastic molding design, light weight,
compact size, noble elegant model
design make the product elegant
appearance.
The control panel can be disassembled
with built-in speed potentiometer and
easy to adjust frequency.
Characteristic
Motor parameter automatic adjustment Built-in dynamic parameter automatic adjustment function,
automatically identify motor parameter, ensure stability and
precision of system.
Protection function in all fields Protection of under-voltage, over-voltage, over-current,
prevention of motor stall, over-load and over-heat.
Three operating modes
1. Standard V/F mode: Sine PWM wave output, AC current
output detection, compensation for distortion due to dead time
effect, reduction of motor torque vibration.
Advantages: Improve operation characteristic at low frequency,
optimize working condition, enhance efficiency. 2. Sensorless vector mode: Frequency inverter operates
through sensorless vector control calculation system, supply
extra torque compensation voltage, not only increases motor
toque at low speed, but also compensates the slippage
difference caused by the load increasing.
Advantages: Realize parameter automatic adjustment, high
torque at low frequency, high precision of rotation speed.
Adopt advanced programmable
control terminals with the function of all kinds of
machinary'parameter setting in advance to increase the
additional value of inverter. 3. Output power (torque) control mode: Output frequency
can be decreased automatically while output power exceed
upper limit value.
Advantages: This function can substitute the tension sensor,
magnetic powder coupler, mechanical clutch and so on. Communication function Built-in RS-485 standard communication, one or more
frequency inverters can be dynamically. controlled by one
computer at the same time, besides that, one computer may
simultaneously control nearly 99 frequency inverters (Relay
amplifier must be installed when the number of frequency
inverters exceeds 31 units). Supply HPI protocol and
standard MODBUS Protocol.
High output frequency The range of output frequency of KV6000 Vector Frequency
Inverter is from 0 to 650Hz, much better than other
traditional frequency inverter.
Power of motor: 0.75~500KW
Voltage supply: 220V/380V/460V/575V/660V
Rich function of built-in PID regulator Fan, pump, compressor, boiler, central air conditioning and
so on, most of them belongs to degression torque load,
achieve the close-loop circuit controlling by PID
adjustment.HPI6000 frequency inverter adopts the up-todate
fuzzy control technology to achieve the best PID
adjustment function (See the following diagram PID
comparison with other traditional inverter)
HPI6000 comparison with other brand frequency inverter
Characteristic
It can be selected PID automatically by digital signal terminal
during the operation.
It can be monitored PID output value and related parameter by
analog AM output signal.
Suitable for all kinds of the sensor PID feedback signal can be
voltage(0-5/0-10v) or current 4-20mA
Unique cooling Fan Cooling fan with ON/OFF automatic control function so as to
extend life of fan. Special control function for industrial mechanic design HPI6000 sensorless vector inverter adopts the design of
programmable control terminal, nearly 100 kinds of selective
function from digital input and output terminals, 3 group of
analog signal input, with many kinds modes for restart function
after the trouble and instant power off and breakdown, built-in
PID adjustment function, singal treatment function needed by
gearing proportion ,
Frequency oscillation function in spinning, more speed section
choice, automatic operation function and so on.. HPI6000's
unique torque limitation function can be used in winding
machine. Unique variable carrier frequency (2~16KHz) HPI6000 sensorless vector frequency inverter can switch the
carrier frequency automatically during the operation. When operation frequency is higher than the turning point of
carrier frequency, the carrier frequency becomes maximum
setting value of the carrier frequency, otherwise the carrier
frequency automatically adjusts between the maximum
carrier frequency and the minimum carrier frequency
according the operation frequency.
Energy saving control To achieve the high efficiency during the energy saving
control operation of HPI6000 sensorless frequency inverter
through maximum efficiency control, sensorless vector
control and constant power control and V/F control. Not only
fan and pump, but also ordinary mechanical apparatus run
at extraordinary energy saving effect. Safe and precise protection function With the high speed and high precision current limitation
control function to control the trip caused by over current
and improve the operation continuity of restart after
instantaneous stop and stall and restart from the trouble.
More advantages of HPI6000 driving characteristics
comparison with traditional products.
HPI6000 sensorless vector control mode *The function of automatic parameter identification and
automatic slippery difference compensation
*Stable dynamic performance, quick response
* Rotating speed with high precision (highest precision 0.5%)
*Achieve output torque (power) control mode
*High torque at low rotor speed (150% rated torque at
15~300rpm)
Spatial voltage vector control *Normal V/F control mode
*Torque shortage at low frequency, motor oscillation at low
rotating speed, high fluctuation of rotating speed
*Open-loop circuit control, poor dynamic response. Torque
cannot be adjusted even in the entire rotating speed range.
Torque response is very poor when the rotating speed is near to
0rpm.
*Poor rotating speed adjustment.
Technical date
Output power (torque) control mode
Apply in automatic tension control (Example: apply in
reeling machine), output power (torque) .This control mode
can substitute the mechanical clutch and the magnetic
power clutch
Gearing proportion control HPI6000 series frequency inverter with the function of the
parameter automatic identification and slippery difference
compensation, in this way, the slippery difference of low
speed and high speed will be the same, the precision of
speed adjusting will be higher, that is the reason to ensure
the rotating speed precision and adjustment automatically
under voltage changed and load factor changed.
It is specialized in mechanical system of high torque
precision drive and more motors gearing proportion control.
Speed tracing when instantaneous power off and
restart after the trouble. For speed tracing function, when restart after instantanous
power off, it can detect the rotating speed at that time, then
input the proper frequency to reduce the surge current, it is
specialized in fan and pump.
Operation frequency with the elastic choice, the
time counter realizes the operation control
automaticlly.
Note:
The function of DI1,DO1 can be set the time counter with period of
20sec by F041,F045 and F071.
When SW1 is on , the frequency inverter starts to run, the time
counter starts. The output of time counter decides the motor
REV or RST, repeat it every 20sec.
The first 10sec, the frequency inverter RST with 60HZ.
The last 10sec, the frequency inverter forward with VR setting
value.
Automatic operation function
Automatic operation function with many kinds of changes
instead of the simple PLC, it is for many special requirements,
With simple setting, the operator can to achieve the industrial
mechanical needed function.
Technical data
Technical data and specification list
Control panel introduction
Basic connection diagram
Instruction of control terminal function
Terminal function *6 groups digital programmable input
(100 functions for option)
*3 groups anolog input
*1 group anolog programmable output
(17 functions for option)
*2 groups collecting electrode
(94 functions for option)
*1 group programmable relay output
(94 functions for option)
*10V/5V accessory power supply output for analog
setting input
*24V-100mA accessory power supply output
for digital input
Model instruction Instruction of frequency inverter model
Annotation
E HP means hapn SL means solcom
P R:soft starter I :frequency inverter
P 10:1000 series 60:6000 series
02:220V;03:380V;05:575V; 06:660V;09:960V ;11:1140V
5 T:trip phase S :single phase
6 D75:0.75KW 075:75KW, 315:315KW
7 G:constant torque type P:blower/water pump type
Z :injection molding machine type B:lifting type
8 A:cabinet machine B:hang-up machine C:bare machine D :spare parts
1 nterprise code
2 roduct code
3 roduct serial number
4 Voltage class Phase number Power parameter Using type code Installation type
Classification of HPI6000 series Frequency inverter model range G cabinet machine
1 over-current multiple of G type is 1.5 over-current multiple of G type is 1.2
over-current multiple of B type and Ztype is 2.
2 within braking unit when power is under15KW.
3 within DC reactor when power is under30KW.
4 0.75~30KW are plastic shells.
5 110KW~400KW are cabinet types.
Frequency inverter model range P series blower, water pump
Note the outline dimension of P type is one size smaller than G type.
Installation dimension
Application case
Application for one motor drive, such as: pump,
blower, compressor, extruding machine, mixer, ball
mill machine, mine elevator, metallurgical mill
machine.
Basic structure
Application in injection molding machine 1)Easy to operate
2)High reliability
3)Soft start, extending the serice life of equipment and mold
4)Reducing the noise,improving the working environment
5)To detect the signal of pressure and flowrate and trace to
control automatically, then supply the proper power to
achieve the energy saving, energy saving up to 30%-70%.
Application in air compressor To supply high torque under low speed.
1)Keep the pressure of compressed air constant
2)Energy saving, reduce the cost of operation.
3)Improve the pressure control precsion
4)Extending the service life of compressor
5)Reduce the noise of compressor
Application in CNC lathe The frequency inverter can detect the parameter of motor
dynamic operation and adjust the parameter automatically,
in this way, ensure the highest efficiency during the motor
operation.
Application in escalator For escalator, it will be waste when it operates with no
passenger, if use energy saving technology of HPI6000
frequency inverter, the escalator will operates when
passenger on according to the sensor, the escalator
also can decrease the speed or stop when passenger
off according to the sensor.
Application in elevator HPI6000 frequency inverter adpots sensorless vector
control technology to meet the requirement of elevator
with high starting torque, it means the frequency inverter
can supply 150%torque when 0HZ.
Application in mixer HPI6000 frequency inverter adopts voltage /frequency
control to start motor softly, in order to avoid the strike
of electric net and motor itself and other equipments
from motor starting with full voltage.
Application case
Application in water pump
HPI6000 frequency inverter adopts the technology of
changing frequency to adjust the speed.It can adjust
the speed of the motor to control flowrate and balance
the demand and supply to reduce the consumption of
the motor.It also realizes to control the speed of motor
with stepless speed regulation.
Application in blower HPI6000 frequency inverter adopts the built-in PID to
adjust and control the rotating speed of blower to keep
the air flowrate constantly, in this way, to meet the
requirement of energy saving.
1)High efficiency: To adopt the technology of changing
frequency to adjust speed, adjust the air flowrate directly,
reduce the useless power, increase the working efficiency
of system.
2)Energy saving: After changing frequency to adjust the
speed, the blower operates at 30-45HZ,energy saving
above 25%-70%, the frequency is lower, the energy
saving rate is higher.
3)Extending system life: To realize the changing frequency
soft starting, reduce the strike of electric net and motor
itself, increasing the life of the motor and the system.
4)To boost the quality of blower operation: After changing
frequency to adjust the speed, it can adjust the rotating speed
and frequency to control the proper air flowrate.
Application in textile machinery 1) To control the speed of motor with stepless speed regulation.
2) High precsion speed, stable speed value.
3)Easy to adjust the speed
4)To protect the motor and start smoothly.
Application in woodworking machinery Stable speed adjustment and high efficiency.
Application in printing machine HPI6000 frequency inverter shall adjust the speed of main
motor and rinsing motor to achieve the process of paper feed,
inking, printing and ink rinsing.
Application in extruding machine 1)High torque output when 0HZ
2)Automatic energy saving operation function can reduce
the current accordeing to the torque changing, in this
way, not only energy saving, but also guarantee the
reliable and stable.
Application in horizontal type paper soaking
production line 1)Adopt the RS485 communication to contact computer and
ensure the system stable.
2)Technical grade modulation design, precsion control
synchronous, succinct man-machine conversation.
Application in pulping papermaking production line 1)The frequency inverter with small volume and light weight,
easy to install, simple testing, easy to operate, low noise
without shaking.
2)Speed adjustment with high precsion, the motor rotating
speed without changed when the load and net voltage
changed, so the frequency inverter has a good adaptability.
3)The frequency inverter with complete protection function,
high integrated level, so it is more reliable, easy to maintain
due to self-diagnosis function.
4)Good energy saving to save about 30% .
5)To adjust the motor with infinitely variable speeds, low starting
current, and without the strike of electric net and motor itself
and other equipments.
๏ปฟLast 5 Search Engine Bot Dectect Hot Bot search ( 67.195.111.222
) Date : 10 January 2011 Time 17.59 Hot Bot search ( 67.195.111.222
) Date : 10 January 2011 Time 17.41 Alexa search engine ( 204.236.226.210
) Date : 10 January 2011 Time 17.04 Yandex ( 95.108.249.29
) Date : 10 January 2011 Time 15.29 Hot Bot search ( 67.195.111.222
) Date : 10 January 2011 Time 14.26
